Booklet Edits

ScanTools software allows any sheet of document (booklet) to be selected. This is done in the Application Definition module, Document, Stacker menu selection. See Stacker Select.

When a sheet fails, all sheets following the failed sheet are selected to the same stacker as the failed sheet.

The output stacker number equals the stacker where the last sheet was sent. For more details on flag byte definitions, see NCS Header.

The following table provides the end result of where each page in a booklet ends up, depending on what was specified for Program Action and Scanner Action in the edit profile. This is based on a three-page booklet.

NOTE: References to the secondary stacker apply only to the OpScan 15 and 21 scanners.

Program
Action

Scanner
Action

Failed
Sheet

Pass Flag
(Byte 22)

Grid Error Flag
(Byte 24)

Output Stacker
(Byte 29)

Results

No action

No action

1

Y

>

.

All sheets to output

No action

No action

2

Y

>

.

All sheets to output

No action

No action

3

Y

>

.

All sheets to output

No action

Stop

1

Y

.

.

1st sheet to output and stop

No action

Stop

2

Y

.

.

2nd sheet to output and stop

No action

Stop

3

Y

.

.

3rd sheet to output and stop

No action

Primary

1

Y

>

1

All sheets to Primary stacker

No action

Primary

2

Y

>

1

2nd & 3rd sheets to Primary stacker

No action

Primary

3

Y

>

1

3rd sheet to Primary stacker

No action

Stop/Pri

1

Y

.

.

1st sheet to Primary and stop

No action

Stop/Pri

2

Y

.

.

2nd sheet to Primary and stop

No action

Stop/Pri

3

Y

.

1

3rd sheet to Primary and stop

No action

Secondary

1

Y

>

2

All sheets to Secondary stacker

No action

Secondary

2

Y

>

2

2nd & 3rd sheets to Secondary stacker

No action

Secondary

3

Y

>

2

3rd sheet to Secondary stacker

No action

Stop/Sec

1

Y

.

.

1st sheet to Secondary and stop

No action

Stop/Sec

2

Y

.

.

2nd sheet to Secondary and stop

No action

Stop/Sec

3

Y

.

2

3rd sheet to Secondary and stop

Flag

No action

1

N

>

.

All sheets to output

Flag

No action

2

N

>

.

All sheets to output

Flag

No action

3

N

>

.

All sheets to output

Flag

Stop

1

Y

.

.

1st sheet to output and stop

Flag

Stop

2

Y

.

.

2nd sheet to output and stop

Flag

Stop

3

Y

.

.

3rd sheet to output and stop

Flag

Primary

1

N

>

1

All sheets to Primary stacker

Flag

Primary

2

N

>

1

2nd & 3rd sheets to Primary stacker

Flag

Primary

3

N

>

1

3rd sheet to Primary stacker

Flag

Stop/Pri

1

Y

.

.

1st sheet to Primary and stop

Flag

Stop/Pri

2

Y

.

.

2nd sheet to Primary and stop

Flag

Stop/Pri

3

Y

.

1

3rd sheet to Primary and stop

Flag

Secondary

1

N

>

2

All sheets to Secondary stacker

Flag

Secondary

2

N

>

2

2nd & 3rd sheets to Secondary stacker

Flag

Secondary

3

N

>

2

3rd sheet to Secondary stacker

Flag

Stop/Sec

1

Y

.

.

1st sheet to Secondary and stop

Flag

Stop/Sec

2

Y

.

.

2nd sheet to Secondary and stop

Flag

Stop/Sec

3

Y

.

2

3rd sheet to Secondary and stop

Reject

No action

1

N/A

N/A

N/A

All sheets to output

Reject

No action

2

N/A

N/A

N/A

All sheets to output

Reject

No action

3

N/A

N/A

N/A

All sheets to output

Reject

Stop

1

Y

.

.

1st sheet to output and stop

Reject

Stop

2

Y

.

.

2nd sheet to output and stop

Reject

Stop

3

Y

.

.

3rd sheet to output and stop

Reject

Primary

1

N/A

N/A

N/A

All sheets to Primary stacker

Reject

Primary

2

N/A

N/A

N/A

2nd & 3rd sheets to Primary stacker

Reject

Primary

3

N/A

N/A

N/A

3rd sheet to Primary stacker

Reject

Stop/Pri

1

Y

.

.

1st sheet to Primary and stop

Reject

Stop/Pri

2

Y

.

.

2nd sheet to Primary and stop

Reject

Stop/Pri

3

Y

.

1

3rd sheet to Primary and stop

Reject

Secondary

1

N/A

N/A

N/A

All sheets to Secondary stacker

Reject

Secondary

2

N/A

N/A

N/A

2nd & 3rd sheets to Secondary stacker

Reject

Secondary

3

N/A

N/A

N/A

3rd sheet to Secondary stacker

Reject

Stop/Sec

1

Y

.

.

1st sheet to Secondary and stop

Reject

Stop/Sec

2

Y

.

.

2nd sheet to Secondary and stop

Reject

Stop/Sec

3

Y

.

2

3rd sheet to Secondary and stop

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

support@scantron.com

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.