Stacker Select dialog

In the ScanTools Application module window, you select stacker options by selecting Stacker from the Document menu. The Stacker Select dialog box appears.

Sheet

Selects the sheet for which the displayed stacker options apply. You can set different options for different sheets on a document.

Options

Enables you to select how ScanTools controls your scanner.

No Stacker Command

No stacker select option applies to this sheet.

Go Unless Edit Overrides

The sheet is selected if called for by the edit profile.

Unconditional

The sheet is always selected.

Stacker

Enables you to choose which stacker tray this sheet is sent to if the sheet is selected. These choices are enabled only if you select Go Unless Edit Overrides or Unconditional in the Options above. If the scanner currently selected in Scanner Configuration does not have a Primary or Secondary Select stacker tray, you may still choose one; however, the option appears in red, with a message telling you it is not available on the current scanner.

Output

If the sheet is selected, it is sent to the output tray.

Primary Select

If the sheet is selected, it is sent to the primary select stacker tray. If this choice is used and the current scanner does not have this installed, the scanner action is STOP. OpScan iNSIGHT 70/150, 5000i, and OpScan 7, 8, 10, 15, and 21 scanners have primary select stackers standard. This stacker is optional on OpScan iNSIGHT 4 and OpScan 3, 4, and 4U scanners. iNSIGHT 20, iNSIGHT 30, OpScan iNSIGHT 2 and OpScan 2, 5, and 6 scanners do not have this stacker.

Secondary Select

If the sheet is selected, it is sent to the secondary select stacker tray. If this choice is used and the current scanner does not have this installed, the sheet is sent to primary select tray, if there is one. Otherwise, scanner action is STOP. OpScan 15 and 21 scanners have secondary select stackers. Other scanners do not have this stacker.

Items shown in red are not available on current scanner

If your configured scanner is not equipped with a primary or secondary select stacker, the message Items shown in red are not available on current scanner appears in red in the dialog.

For details on results if using an edit profile with a booklet document, see Booklet Edits.

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

support@scantron.com

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.