Product Updates

Released: July 2020

Version 042020 of the iNSIGHT 700c firmware provides support for the pick interface and the programmable thickness system.

Notes:

Firmware version 042020 should be used with ScanTools Prisma version 3.0.1 or later.

Download

Update Instructions

1. Unzip the file you just downloaded.
2. Open the Image Diagnostics Tool application.
3. Click the Scanner Control button to open the iNSIGHT USB Scanner Control Interface.
4. Select the Scanner Service Mode Functions checkbox to enable the service functions.
5. Click the Firmware Update button.
6. Click Yes to update the scanner firmware. The Select Firmware File window opens.
7. Navigate to the firmware file you downloaded (firmware files have an .app extension) and click Open. When the firmware update is complete, the iNSIGHT 700c USB Scanner Control Interface will exit service mode.

Note: See the iNSIGHT 700c Operator Guide for more information on updating the scanner firmware.

Released: January 2018

This release supports the i NSIGHT 4, 4ES, 20, 20 Plus, 30, 70, and 150 scanners. It also supports the 5000i scanner with speed upgrade.This release corrects a Minimum of Paper message seen during calibration for the iNSIGHT 20 Plus.

Released: June 2014

This release supports the OpScan 2, 4, 4ES, 6, 8, 10, 15, 16, and 21 scanners. This release adds Windows 8 and Windows 10 support for the OpScan 2, 4, 4ES, 6, and 8 scanners.

Released: October 2021

This release supports the iNSIGHT 4ES, OpScan 4ES, OpScan 6, and OpScan 8 scanners with ScanTools Plus 8.x and ScanTools Prisma under Windows 10. The iNSIGHT 700c, OpScan 16, iNSIGHT 70, iNSIGHT 150, and iNSIGHT 1500c scanners are supported with ScanTools Prisma under Windows 10.