This only applies to scanning user exits, not for Edit or Score user exits.
You can use this user exit to do image clipping in any user exit which is to be used with an iNSIGHT 2/4 scanner with imaging, to do clipping while the next sheet is being fed, to increase performance. This user exit point can also be used on the iNSIGHT 70/150 and 5000i scanners without changing performance because a sheet is fed long before the DOCLIP User Exit point on an iNSIGHT 70/150 or 5000i scanner.
This user exit point should be used to do clipping for any user exit which is to be used on both an iNSIGHT 70/150, 5000i, iNSIGHT 20, or iNSIGHT 30 scanner and an iNSIGHT 2/4 scanner with imaging.
DOCLIP is called one time per sheet after the transport print string has been printed on the sheet and the sheet has been stacked.
| Parameter | Status |
|---|---|
|
Exitpoint |
15 |
|
Imgbuf |
Valid (only bubbles needed based on application grid definitions) |
|
Imgback |
Valid |
|
Outrec |
Complete unless booklet; data from last n sheets if scanning a booklet |
|
Markbuf |
Complete unless booklet; data from last n sheets if scanning a booklet |
|
Prtstr |
Initialized to selected combination of serial and batch numbers and date, or edit print. |
|
Reclen |
Valid |
|
Appnum |
Valid |
|
Seqnum |
Valid |
|
Docnum |
Valid |
|
Request |
0x8000 TERMINATE |
|
HwndScan |
Valid |
|
See Help on Help for additional information on using this help file. See Scantron Technical Support for additional information on technical support and training options. See the ScanTools Suite System Requirements for further details on hardware and software requirements. ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:
|
Scantron Corporation
Customer Service (forms, products, and services): 1-800-SCANTRON (722-6876) Technical Support: 1-800-445-3141 |
|
|
Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation. LINKS TO THIRD PARTY SITES This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators. |
||