You are here: Application Designer "What's This?" > Dialog Boxes > Document Sequence Dialog
Purpose Document May be followed by OK Button Cancel Button Cancel Button Check All Button Clear All Button

Document Sequence Dialog Box

Use this dialog box to specify the order in which a batch of documents are fed in the scanning job. If the forms are not fed in that order during scanning, ScanTools shows an error so that the scanning operator can correct the problem. Set document sequencing by selecting Options > Sequence….

NOTE: Document sequencing is commonly used when a header sheet is required. In that scenario, a header sheet is required after "Start of batch." The data (e.g. school district number and school name) from the header sheet is picked up in a sticky field. When the tests are scanned after the header, the sticky field data from the header sheet is inserted into each test data record.

What's on the screen?
How do I…
…set a form sequence?

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

[email protected]

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.