Profile Name dialog - Conversion Profile

This dialog box appears when you are creating a new conversion profile and move and click your mouse over the Conversion Profile File Name: untitled area at the top of the Conversion Profile dialog box.

File name:

Enter a name for the conversion profile, using a maximum of 24 characters.

Names of currently existing profiles are listed below the text entry area. You can select an existing name from the list. This will cause the existing profile to be overwritten when you save the profile.

A profile name can contain alphanumeric characters, but CANNOT include any of the following special characters:

: " | < > ? / *

Also valid DOS device names should NOT be used, such as:

aux, com1, com2, com3 com4, con, lpt1, lpt2, lpt3

Related topic

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

[email protected]

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.