Add Form ID dialog

You access this dialog box from one of the following when defining a specific sheet in an application:

Use it to add a new form ID mark, or change the attributes of an existing form ID mark.

Cell Location

Enter a number for the Cell position along the timing mark. This is the X-axis of the form. Range of valid numbers is:

  • 1-47 for .166 spacing (6/inch) forms
  • 1-48 for .166 spacing (48 cells) forms, for Image Scanners only
  • 1-40 for .200 spacing (5/inch) forms
  • 1-24 for .300 spacing forms

TM Location

Enter the TM (Timing Mark) number. This is the Y-axis of the form. Range of valid numbers is 1 - the currently defined number of timing marks for the side of the sheet selected.

Side

Select whether the form ID mark is on the top or bottom of the sheet.

Type

Select whether the form ID mark is black or white. Black means that the form ID is present in the specified location. White means that the form ID is NOT present in the specified location or is lighter than the form ID threshold. This allows two forms to have identical Form ID marks.

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

[email protected]

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.