Add Skew Mark dialog

You access this dialog box from one of the following when defining a specific sheet in an application:

Use it to add a new skew mark, or change the attributes of an existing skew mark. If skew marks are printed on the document, they must be defined manually using this dialog. Skew marks are not automatically defined by scanning a sheet and/or adding a background image .tif file.

Cell Location

Enter a number for the Cell position along the timing mark. This is the X-axis of the form. Range of valid numbers is:

  • 1-47 for .166 spacing (6/inch) forms. The recommended value is 45.
  • 1-48 for .166 spacing (48 cells) forms, for Image Scanners only. The recommended value is 46.
  • 1-40 for .200 spacing (5/inch) forms. The recommended value is 38.
  • 1-24 for .300 spacing forms. The recommended value is 22.

TM Location

Enter the TM (Timing Mark) number. This is the Y-axis of the form. Range of valid numbers is 1 - the currently defined number of timing marks for the side of the sheet selected.

Recommended timing mark values for scanners except the iNSIGHT 20 and iNSIGHT 30: assuming 3 skew marks per side of sheet:

  • 2 (the second timing mark)
  • a timing mark midway between timing mark 2 and the second to last timing mark
  • the second to last timing mark number

Recommended timing mark values for iNSIGHT 20 and iNSIGHT 30 scanners: assuming 3 skew marks per side of sheet:

  • timing mark closest to one inch down the sheet
  • timing mark closest to 3.5 inches down the sheet
  • the timing mark closest to 9 inches down the sheet

Additional guidelines for the iNSIGHT 20 and iNSIGHT 30 scanner are:

If there is no data before the 3.5 inch mark, then the first mark can be omitted.

If there is no data after the 3.5 inch mark, then the last mark can be omitted.

The first mark can be moved down the form to the first timing mark.

The last mark can be moved up the form to the last timing mark.

Side

Select whether the skew mark is on the Top or Bottom of the sheet.
Related topics

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

[email protected]

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.