To install and run ScanTools software, you must have the proper computer hardware and operating system. If you attempt to install ScanTools Plus software on an unsupported operating system, you receive an error message and are unable to install. The requirements are different depending on which scanner you are using, and what action you are performing.
To install or uninstall ScanTools Plus you must have Administrator Rights.
|
Scanners |
PC Hardware |
Operating Systems |
|---|---|---|
|
OpScan iNSIGHT™ 70 OpScan iNSIGHT 150 5000i® with speed upgrade |
Pentium® processor: 1 GHz 32-bit minimum (x86) or 64-bit (x64) minimum System memory: 1 GB minimum Hard drive space: 40 GB hard drive with at least 15 GB of available space Monitor at 1024 x 768 or higher resolution A CD-ROM drive for installation Ethernet Adapter 10/100/1000 Mbps, recommended |
Windows® Vista® Business Edition or greater, 32-bit Edition only SP1 or greater Windows XP Professional SP or greater All Windows hotfixes for the service pack must also be installed |
|
iNSIGHT 20 and |
Pentium processor: 2 GHz 32-bit (x86) or 64-bit (x64) minimum System memory: 2 GB minimum (3 GB recommended for Windows 7; 4 GB recommended for documents longer than 14" and /or higher resolution> Hard drive space: at least 20 GB of available space USB 2.0 connection |
Windows 7, 32-bit and 64-bit Editions Windows Vista Business Edition or greater, 32-bit Edition only, SP1 or greater Windows XP Professional SP3 or greater All Windows hotfixes for the service pack must also be installed |
|
5000i |
Same as iNSIGHT 70/150 (above) |
Windows XP Professional SP3 or greater
All Windows hotfixes for the service pack must also be installed |
|
iNSIGHT 2 with Imaging iNSIGHT 4 with Imaging iNISIGHT 4ES |
Same as iNSIGHT 70/150 (above) with the exception below: RS232 connection: OMR processing (not required for iNSIGHT 4 ES) USB 2.0 connection: Image or OMR processing If using a USB 2.0 Add-on card: Must use one of the following cards, with the driver provided by the card vendor:
|
Windows Vista Business Edition or greater, 32-bit Edition only, SP1 or greater Windows XP Professional, SP3 or greater All Windows hotfixes for the service pack must also be installed |
|
iNSIGHT 2 iNSIGHT 4 OpScan 4ES |
Same as iNSIGHT 70/150 (above) with the exception below: USB 2.0 - OMR processing RS232 - OMR processing (not required for OpScan 4ES) |
Windows 7, 32-bit and 64-bit Editions Windows Vista Business Edition or greater, 32-bit Edition only SP1 or greater Windows XP Professional SP3 or greater All Windows hotfixes for the service pack must also be installed |
|
OpScan 2 OpScan 3 OpScan 4/4U OpScan 5/6 OpScan 7/8 OpScan 9010M/9020M |
Same as iNSIGHT 70/150 (above) with the exception below: RS-232 connection or USB 1.1 or 2.0 connection
|
Windows 7, 32-bit and 64-bit Editions Windows Vista Business Edition or greater, 32-bit Edition only, SP1 or greater Windows XP Professional SP3 or greater All Windows hotfixes for the service pack must also be installed |
|
OpScan 10 OpScan 15 OpScan 21 |
Same as iNSIGHT 70/150 (above) with the exception below: USB connection |
Windows 7, 32-bit and 64-bit Editions Windows Vista Business Edition or greater, 32-bit Edition only, SP1 or greater Windows XP Professional SP3 or greater All Windows hotfixes for the service pack must also be installed |
|
EZData® |
Same as iNSIGHT 70/150 (above) with the exception below: RS-232 connection or USB 1.1 or USB 2.0 connection
|
Windows 7, 32-bit and 64-bit Editions (RS232 connection only) Windows Vista Business Edition or greater, 32-bit Edition only, SP1 or greater Windows XP Professional SP3 or greater All Windows hotfixes for the service pack must also be installed |
To download the iPORT scanner drivers, access:http://www.scantron.com
Follow the installation instructions in the iPORT Install.pdf file to install the iPORT drivers. This file can be found on the Pleora Technologies iPORT Drivers CD if you are installing from the CD. If you downloaded the drivers from the web link listed above, the iPORT Install.pdf file will be one of the files that was downloaded.
For any User Exit work, you must use a compiler that can create Windows Dynamic Link Libraries (DLLs). Scantron has developed and tested user exits using the following development platforms:
User Exits written for ScanTools II version 1.3 (and later) and Image ScanTools version 5.0 (and later) will run with ScanTools Plus.
User Exits written for earlier versions of ScanTools software will require rework.
See Rebuilding User Exits from Image ScanTools version 4.2 and Earlier.
|
See Help on Help for additional information on using this help file. See Scantron Technical Support for additional information on technical support and training options. See the ScanTools Suite System Requirements for further details on hardware and software requirements. ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:
|
Scantron Corporation
Customer Service (forms, products, and services): 1-800-SCANTRON (722-6876) Technical Support: 1-800-445-3141 |
|
|
Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation. LINKS TO THIRD PARTY SITES This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators. |
||
Related topics