When a command file is downloaded to the scanner, the scanner translates it.
If the command file was translated successfully, the scanner responds with the character G followed by a string of four decimal numbers, indicating the number of statements processed. Example:
G0059
If an error occurs during the translation process, the scanner responds with an error code, and the number of the statement containing the error. Download Translate error codes and their meanings are listed below. You must correct the error, then re-generate the command file, and then download it again.
|
L |
Limit error. An implementation defined limit was exceeded during translation of the command. For example, too many documents, too many sheets, output record length too long, etc. |
|
M |
Out of Memory error. The scanner’s application memory was exhausted during translation of the command file. Either modify the command file to reduce the size of the application, or delete one or more stored applications, and try again. |
|
O |
Order error. The command was not expected at this point in the file. For example, a SHT command was encountered before a DOC command, or an END command was encountered when the last grid specified a linked edit. |
|
P |
Parameter error. A parameter is missing, too long, contains an invalid character, or has an illegal value. |
|
S |
Syntax error. The statement is improperly formatted. For example, the keyword is not three alphabetic characters, a required parameter is missing, or an invalid parameter separator or statement terminator is used. |
|
U |
Unknown command keyword error. The command keyword (name) was misspelled. |
|
V |
Validation error. The information stored in the scanner’s application memory is corrupt. All stored applications are lost and must be downloaded and translated again. This error is also reported when all applications are intentionally deleted by the user. |
|
See Help on Help for additional information on using this help file. See Scantron Technical Support for additional information on technical support and training options. See the ScanTools Suite System Requirements for further details on hardware and software requirements. ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:
|
Scantron Corporation
Customer Service (forms, products, and services): 1-800-SCANTRON (722-6876) Technical Support: 1-800-445-3141 |
|
|
Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation. LINKS TO THIRD PARTY SITES This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators. |
||