Read-Write Property.
Type: Boolean
For Image Scanners Only - 5000i and iNSIGHT scanners.
These are the only scanners that produce phantom clips and store them in the ScanTools master TIFF file.
Phantom clips are taken to allow the ScanTools post-scan data editor to highlight the row or column in a grid that is failing edit. Phantom clips do not contain any data and most commercially available TIFF readers will report a phantom clip as an error in the master TIFF file.
When set to TRUE, ScanTools Plus will create phantom clips in the master TIFF file while scanning. Creating phantom clips also requires an edit profile specified in SessionInfo.EditProfile property. The phantom clips can be accessed through the Clips Table.
When set to FALSE, no phantom clips are created, making the master TIFF file smaller. However, even though no phantom clips are actually created, the CLIPS Rowset in Data Services reports metadata for all potential phantom clips.
This property is the same as the setting in the ScanTools Plus Diagnostics Menu, Advanced Configuration dialog, Take phantom clips check box.
propget, HRESULT TakePhantomClips([out, retval] BOOL *pVal);
propput, HRESULT TakePhantomClips([in] BOOL newVal);
|
TRUE (default) |
Create phantom clips in the ScanTools master TIFF file. |
|
FALSE |
Do not create phantom clips in the ScanTools master TIFF file. |
Capture and Access Image Clips to/from the Master TIFF file - ClipServer
How to Implement Event Driven Scanning
|
See Help on Help for additional information on using this help file. See Scantron Technical Support for additional information on technical support and training options. See the ScanTools Suite System Requirements for further details on hardware and software requirements. ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:
|
Scantron Corporation
Customer Service (forms, products, and services): 1-800-SCANTRON (722-6876) Technical Support: 1-800-445-3141 |
|
|
Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation. LINKS TO THIRD PARTY SITES This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators. |
||