You are here: Programmers Reference > Programmer's Reference > ScanningManager > SheetStacked

ScanningManagerEvents.SheetStacked event

This event is fired after stacking the current sheet.

For image scanners, it follows the Clip event. The data record has not yet been written to the data file. Clips for the sheet have been optimistically written to the clip file pending subsequent commit or reject for the current document. SheetStacked is not fired if the solution program stops the scanning session during the Clip event.

For OMR only scanners, clipping actions are not available at SheetStacked. However the solution does have the ability to perform changes to the data record with the operator using the sheet off the select stacker/output hopper.

Typical use of this event is to perform sheet specific operations. For example you may modify the output record without concern that ScanTools Plus will overwrite your changes.

ScanningManager.Ping returns L_STATE_SCANNING at this event.

IDL

HRESULT SheetStacked([in] IScanEventArgs* ScanEventArgs);

Input Parameters

IScanEventArgs with the valid properties as listed in ScanEventArgs and ScanningManager Events Valid Combinations.

Exceptions

Scanning Services Exceptions

See also

ScanEventArgs Interface Summary

ScanningManagerEvents Summary

Event Driven Scanning

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

support@scantron.com

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.