Changing Paper Size Units

In the Image Clips dialog, the default paper size is set to 8500 x 11000 .001 inches. The default unit is thousandths of an inch.

The Paper Size Units can be changed to MM (millimeters) by changing your Windows Measurement system setting.  To do this, perform the following:

NOTE: Your Windows screens may look slightly different depending on the version you are running.

  1. Select Start | Settings | Control Panel | Regional and Language Options.
  1. Select Customize... .
  1. Under Measurement system, select Metric. Click OK to close the Customize Regional Options and then Click OK again to close the Regional and Language Options dialog.
  1. This results in the Paper Size Units being changed to MM (millimeters) in the Image Clips dialog

 

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

support@scantron.com

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.