You are here: Programmers Reference > Programmer's Reference > ScanningManager > Clip

ScanningManagerEvents.Clip event

This event is fired during scanning only when using an image scanner: 5000i or iNSIGHT. This event is fired once per sheet, after printing and stacking have been done.

You can process all the clips that you want from this sheet into temporary store – for instance an ADO Stream object. It is a good idea not to save clips to backend storage at this point because the document itself may be rejected and you may not want clips from this document.

ScanningManager.Ping returns L_STATE_SCANNING at this event.

IDL

HRESULT Clip([in] IScanEventArgs* ScanEventArgs);

Input Parameters

IScanEventArgs with the valid properties as listed in ScanEventArgs and ScanningManager Events Valid Combinations.

Exceptions

Scanning Services Exceptions

See also

ScanEventArgs Interface Summary

ScanningManagerEvents Summary

Clip Definition - Requirements and Considerations

Clip Definition - Combining ScanTools Plus Application and ClipHelper

Clip Definition - ClipHelper Interface

Capture Image Clips under Solution Control

Event Driven Scanning

 

 

See Help on Help for additional information on using this help file.

See Scantron Technical Support for additional information on technical support and training options.

See the ScanTools Suite System Requirements for further details on hardware and software requirements.

ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:

  

Scantron Corporation

Customer Service (forms, products, and services):

1-800-SCANTRON (722-6876)

www.scantron.com

Technical Support:

1-800-445-3141

[email protected]

Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation.

LINKS TO THIRD PARTY SITES

This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators.