The following table describes the meaning of values found in the EditFailureMode column of the Edit Failures Table.
| Value | EditFailureMode Constant | Meaning |
|---|---|---|
|
0 |
efmNormal |
No edit required |
|
1 |
efmCompleteness |
Field failed completeness edit (left justified, right justified, complete, no multiples) |
|
2 |
efmLowerBound |
Field failed lower bound check |
|
4 |
efmUpperBound |
Field failed upper bound check |
|
8 |
efmIllegalChars |
Field contained illegal character |
|
16 |
efmBlank |
Field is blank |
|
32 |
efmAlwaysDisplay m, |
Field marked as always display |
|
64 |
efmItemQuality |
Item field failed a quality check |
|
128 |
efmBadDate |
Field failed date edit |
|
256 |
efmDateLowerRange |
Date fails lower range check |
|
512 |
efmDateUpperRange |
Date fails upper range check |
|
1024 |
efmItemRange |
Range failure on item |
|
2048 |
efmDocMarkIntensity |
Document mark intensity failed |
|
4096 |
efmDocMod10 |
Document failed mod 10 edit |
|
8192 |
efmGrayboxBelowThreshold |
Gray box value below edit threshold |
|
16384 |
efmGrayboxAtOrOverThreshold |
Gray box value at or over threshold |
For more information, see Edit Failures Table Definition and Edit Failures Table Overview.
|
See Help on Help for additional information on using this help file. See Scantron Technical Support for additional information on technical support and training options. See the ScanTools Suite System Requirements for further details on hardware and software requirements. ScanTools is a suite of products; the specific information you want may appear in the help for a different module. If you don't find what you're looking for here, try one of the following:
|
Scantron Corporation
Customer Service (forms, products, and services): 1-800-SCANTRON (722-6876) Technical Support: 1-800-445-3141 |
|
|
Copyright © 1998-2012 Scantron Corporation. All rights reserved. Use permitted only under license. www.scantron.com. No part of the Help or user guides may be reproduced in any form, or by any means, without express permission from Scantron Corporation. LINKS TO THIRD PARTY SITES This help system may contain links to third party websites ("Linked Sites"). The Linked Sites are not under the control of Scantron and Scantron is not responsible for the content of any Linked Site, including without limitation any link contained in a Linked Site or any changes or modifications to a Linked Site. Scantron is not responsible for web casting or any other form of transmission received from any Linked Site. Scantron provides Users with the ability to link the Assessment System to the Linked Sites as a convenience to you, and the inclusion of any link does not imply endorsement by Scantron of the Linked Site or any association with its operators. |
||